Image 8 Manuel d'utilisateur télécharger pdf (Page 15)

34. Wrap the Weight Cable (72) around a 3 1/2” Pulley

(24). Attach the Pulley and a Cable Trap (25) to the

Butterfly Upright (1) with a 3/8” x 4” Bolt (59), a 3/8”

Flat Washer (48), and a 3/8” Nylon Jamnut (63). Be

sure that the Cable Trap is turned to hold the

Cable in place.

35. Wrap the Weight Cable (72) around a 3 1/2” Pulley

(24). Attach the Pulley and a Cable Trap (25)

between the lowest holes of the Adjustable Pulley

Plates (23) hanging from the Butterfly Cable (73)

with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut

(50). Be sure that the Cable Trap is turned to

hold the Cable in place.

36. Wrap the Weight Cable (72) around a 3 1/2” Pulley

(24). Attach the Pulley and a Cable Trap (25) to the

bracket on the Butterfly Base (4) with a 3/8” x 1 3/4”

Bolt (57) and a 3/8” Nylon Jamnut (63). Be sure

that the Cable Trap is turned to hold the Cable

in place.

37. Note: For convenience, the weights assembled

in step 8 are not shown in the following draw-

ings.

Wrap the Weight Cable (72) around a 3 1/2” Pulley

(24). Attach the Pulley and a Cable Trap (25) to the

bracket on the Butterfly Base (4) with a 3/8” x 1 3/4”

Bolt (57) and a 3/8” Nylon Jamnut (63). Be sure

that the Cable Trap is turned to hold the Cable

in place.

Bracket

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Pas de commentaire

Image 8 Manuel d'utilisateur Page 15